Yasmina Midi light indicators

No contour lighting

• Yasmina Midi wasn't activated. To activate the speaker, say "Yasmina" or press the button.

• Yasmina Midi may be unplugged from power. Check the cable.

Pulsating white

Yasmina Midi is awaiting setup.

Blinking white on different sides of the speaker

Yasmina Midi is being set up via Bluetooth.

Rotating white

Yasmina Midi is connecting to the Wi-Fi.

Pulsating red

Error connecting to the internet or no connection. If the internet is available on other devices, restart Yasmina Midi or reconfigure the connection.

Yasmina's button is glowing red

Microphones are off.

To enable Yasmina to hear you again, press the microphone mute button on the back of the device.

Pulsating yellow

Resetting to factory settings.

Contour lighting is green in the center

The medium volume level is set.

When you change the volume, the light changes:

• Size — from small (quiet) to large (loud).
• Color — from green (quiet) to red (loud).

Green wave moving from one corner to another

An alarm or timer is going off.

If you have set an alarm on Yasmina Midi, a dot appears in the top right corner of the clock.

Fading green

Active timer.

Pulsating blue

Yasmina Midi is in Bluetooth setup mode.

The contour lighting is blue

Yasmina Midi is playing music from another device via Bluetooth.

Pulsating purple

Yasmina Midi is:

• Turning on.
• Looking for and connecting to Zigbee™ devices.
• Active and listening to you.

Rotating purple

Yasmina Midi is:

• Processing your command.
• Updating.

Pulsating purple from the center of the speaker

A reminder is going off.

Energetic pulsating purple

Yasmina is answering your question.

Colors energetically change following the music

Music is playing.

When music is playing, the contour lighting follows it. You can select the visualization mode in the LED panel settings.